Commercial Dryers

While dryer technology hasn’t changed too much over the years, there have been a couple new features, one being moisture sensing, added to more recent models.  Companies like Electrolux/Wascomat and American Dryer Corp. have really embraced this dry control feature that turns the heat off once the moisture level reaches a preset number entered by the operator.  I love the idea of using this moisture control shut off feature for things like delicate items or linens, and I also love the fact that it frees up the operator from having to babysit the load.

Though I am a fan of the moisture sensing feature, I mentioned that dryer technology hasn’t changed much so that makes purchasing used commercial dryers a great option.  Of course, we always suggest doing your due diligence when purchasing any piece of new or used equipment.  When considering used commercial dryers, take a look at the dryer’s age, condition, and parts availability.  Here are a few key items to check:

• Condition of the basket shaft bearing – to do this simply lift up on the drum from the door opening.  There should be little play, 1” or less.
• Clearance between the basket and the front door opening lip – if there is very little clearance or some rubbing, then the bearings and basket rollers need to be replaced.
• Noise level when the basket turns – if there is a bumping noise, more than likely the front basket support rollers need to be replaced.

Keep in mind that the actual piece of equipment is not the only thing to consider before making a purchase.  Here are a couple more things to investigate:

• Make note of the dryer’s dimensions.  Obviously it needs to fit in the space you have in mind, but it also needs to travel through doors and hallways to get there.
• Be sure you have the proper air make up for the dryer.  This is important from both an efficiency and code standpoint.  Fresh air needs to enter the room from outside at the same rate that it is blown out of the room.  To avoid a draft in the room, place the inlet air behind the dryer, making certain that the opening is 5 times the size of the exhaust pipe area.  Grates and slats many times block a portion of the air vent area, so be mindful of that as well.  Most manufacturer’s installation manuals offer more specifics to help, but we are glad to answer any questions you might have.

Once your commercial dryer is up and running, don’t neglect it.  Be sure to check out Tri-State's resources section on how to provide proper ongoing care for your commercial dryer in North Carolina and elsewhere.  As always, feel free to contact us at 866-885-5218 if you have questions or need assistance.