What made this plant so special? The plant is designed so that the soiled work comes in the side door at the 5 - 90LB RealStar Heated Hydrocarbon machines, is sorted, and then cleaned. Once cleaned, it goes to the adjacent finishing area and flow down isles to the Metalprogetti Assembly Conveyor where they are assembled by customer and continue through the auto bagging station and automatically sorted again to the corresponding customers route storage conveyor. Besides the efficient workflow, this plant's boiler requirement of 75 horsepower led us to suggest that they install two boilers, a Parker Boiler 105-70 H.P and a Parker Boiler 104-50 H.P. The 70 H.P provides the needed steam to operate the plant on most any given day. Adding the 50 H.P and setting the on-off limits will have it fire only when the 70 falls a little behind. In addition to Parker Boiler and RealStar, the plant boasts equipment from Sankosha, Leonard Automatics, and Covers, Etc. Finally, their front counters are made of recycled glass bottles and resin product.
“We are honored to have been chosen by Brothers Cleaners to help with this project,” said Kevin Lawson, Vice President of Tri-State Laundry Equipment. “They showed their complete confidence in our judgement and capabilities. This was an all-encompassing project for our company, requiring most of our staff and capabilities for virtually two years. First by building a complete temporary facility in a leased building, while designing and planning for the rebuilding of their facility. This project was a tremendous undertaking for Tri-State, and in my opinion, the most rewarding too. All our folks were very proud to have been there for the Hilker Family and Brothers Cleaners when their whole world had come down around them. I will always be proud that they turned to us and put their total faith in our ability.”
